Bresser 33-10100 Manuel De L'utilisateur page 30

The image will show on your handbox only seconds later.
You can leave the preview by pressing .
3.4.2 View images or videos
There are three ways to view the captured images or
videos:
1. USB connection with a computer
In ON mode connect the camera with a computer using
the supplied USB cable. The device will be shown as a
flash drive and you can easily start viewing images on the
computer's screen.
2. Connection with TV
In TEST mode connect the camera with a TV set using
the supplied TV cable. A live stream for the camera will
then be visible on the TV screen. Press OK to enter im-
age storage. Press to view the previous image or
for the next. Please note that videos cannot be played
in the LCD screen and only thumbnails of the videos are
shown.
30
3. Via the Handbox Display
Connect the handbox with the powered off device and
move the main switch to position "ON". Choose the pre-
view-mode by pressing
display will now show the last captured image or video.
You can choose the previous or next picture with
The Index and total number of the captured images or
videos will be displayed on the screen. A pop-up will ap-
pear by pressing to search for images or videos. You
can change the index by pressing
the selected file by pressing OK. You cannot view vid-
eos on the handbox. You can leave the Preview-mode
by pressing .
Preview-Mode
or and confirm with OK. The
or and then view
Search for files
or .