Set Date And Time - Bresser 33-10100 Manuel De L'utilisateur

4.1.6 Set video resolution
The following steps explain how to set the video resolution:
a) Press or to select the settings mode.
b) Press OK to access the settings menu.
c) Press or to select video resolution.
d) Press to select VGA(640x480), QVGA (320×240)
or 720p (1280x720).
e) Press OK to save your selection. A red dot will now
indicate your selection.
f) Press or to select the menu item „Quit".
g) Press OK to quit the settings mode.

4.1.7 Set date and time

The date format is month/day/year, the time format is
hour: minute: second (24h mode).
The valid value for years is between 2001 and 2099.
Default setting may vary from the current date. Provided
that date and time settings need to be changed, the
steps are as follows:
a) Press or to select the settings mode.
b) Press OK to access the settings menu.
c) Press or to select date/clock.
d) Press OK to enter into submenu.
34
e) Press or to make a selection and then
change the value.
f) Press OK to save all current settings. A red dot will
now indicate your selection.
g) Press or to select the menu item „Quit".
h) Press OK to quit the settings mode.
4.1.8 Set continuous capturing number
The following shows how to set continuous capture number
to 6 Images.
a) Press or to select the settings mode.
b) Press OK to access the settings menu.
c) Press or to select CAPTURE NUMBER.
d) Press or to select e. g. 3 (3 Images). A continu-
ous capture of 3 images is now selected.
e) Press OK to save the current setting. A red dot will
now indicate your selection.
f) Press or to select the menu item „Quit".
g) Press OK to quit the settings mode.
4.1.9 Set video length
The following paragraphs describe how the video length
value is set. The period of time for video length is be-
tween 10 seconds and 60 seconds.
or to