Table des Matières
Publicité
This product is designed only for specific applications as defined in the instructions and should not be modified or used
for any manner not described in these instructions. Use only recommended accessories. Before using the EVOK 150
Vertical Wall Bed Kit: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE
INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE.
PRODUCT SPECIFIC WARNINGS
I.
TO AVOID THE RISK OF SERIOUS INJURY, DO NOT ALLOW
CHILDREN TO PLAY ON THE BED UNIT OR OPERATE IT WITHOUT
ADULT SUPERVISION.
II. You MUST have another ADULT help you while installing your
EVOK 150 Vertical Wall Bed Kit to make sure the bed does not close
inadvertently while you are working. Failure to do so increases the
risk of serious injury.
III. You MUST install ALL 1/4" x 3" Washer Head Lag Bolts into 2 x 4
or larger wooden wall studs. Failure to secure the unit into wooden
wall studs increases the chance that the bed cabinet will detach and
tip over, potentially resulting in serious injury.
IV. Cabinets for vertical Single and vertical Double beds MUST be
secured, using all required hardware, to at least two (2) wall studs;
cabinets for vertical Queen beds MUST be secured to at least three
(3) wall studs.
V. Wall Bracket (P) and lag bolt placement on images in these
instructions is for illustration purposes only. To avoid the risk of
serious injury, you must correctly place and securely attach Wall
Brackets and lag bolts to wooden studs in your wall.
VI. The bed will not stay down without the weight of the mattress.
Operating the bed mechanism without a mattress in place increases
the risk of sudden closing, entrapment and serious personal injury.
VII. Do NOT use wall anchors or drywall anchors.
Max. Mattress
Bed Size
Single
39 x 75 in (991 x 1905mm)
Double
54 x 75 in (1372 x 1905mm)
Queen
60 x 80 in (1524 x 2032mm)
*Includes weight of bed cabinet door panels, mattress, hardware and bedding
**Includes weight of cabinet doors, mattress, hardware, bedding and users
***Based on cabinet door weight of 2.5 lbs (1.1kg) to 4.8 lbs (2.1kg) per board foot
SAFETY WARNINGS
Max. Mattress
Size
Weight
66 lbs (30kg)
99 lbs (45kg)
132 lbs (60kg)
VIII. Do NOT install against brick or masonry walls or
walls with metal studs.
IX. Do NOT user an impact driver to drive fasteners; the
added torque increases the risk of stripping the pilot
hole and weakening connections. Do NOT overtighten
screws.
X. Do NOT stand on the bed without an adult helper
holding it down to prevent it from lifting up.
XI. Do NOT deviate from the required interior cabinet
opening dimensions listed for the bed size you will be
building. An improperly sized bed cabinet could create
a safety hazard and result in serious personal injury.
XII. Do NOT modify the recommended design of
the bed cabinet to eliminate an Upper and/or Lower
Headboard. Such modifications could allow it to more
easily detach from the wall, causing serious injury.
XIII. Do NOT construct the cabinet from MDF,
particleboard
particleboard. the decreased screw-holding ability of
these materials increase the risk of cabinet joint failure
and serious personal injury.
XIV. Do NOT use a foam or very light mattress with this
product. See required weight specifications below.
Max. Mattress
Max. Load Rating
Thickness
Dynamic* Static**
10 in (254mm) 300 lbs (136kg) 1000 lbs (453kg) 225‐300 lbs (102kg‐136kg)
10 in (254mm) 345 lbs (156kg) 1000 lbs (453kg) 265‐345 lbs (120kg‐156kg)
10 in (254mm) 395 lbs (179kg) 1000 lbs (453kg) 280‐395 lbs (127kg‐179kg)
or
melamine
coated
Suggest. Dynamic
Weight***
MDF
or
Publicité
Table des Matières
