Environmental Protection - EDM Product 08710 Manuel D'instructions

High pressure washer
Operating instructions
1. Unscrew the container (A) from the foam sprayer (15)
2. Add detergent to the container (A) and screw the contai-
ner to the foam sprayer (15)
3. Adjust the amount of detergent with the button (B)
Angle Nozzle (optional)
The angle nozzle (17) can be used for many applications e.g
cleaning the underbody of a car , underneath a lawn mover
without being splashed back with debris, etc
After attaching the angle nozzle (17) be aware of the mo-
ment on the lance trigger gun (11) and lance (13) as the jet is
coming out perpendicular to these.
Patio Cleaner (optional)
The patio cleaner is a powerful accessory for cleaning patio,
driveways, etc.
Attach the Patio Cleaner (19) to the lance. (13)
NOTE: Do not use the Patio Cleaner (19) as a broom but let
is surf smoothly over the surface
After use instructions
The machine should be stored in a frost-free room!
Pump, hose and accessories should always be emptied of
water prior to storing as follows:
1. Stop the machine (press the start/stop switch (5) "O" and
detach water hose, high pressure hose (10) and nozzle (14-
19)
2. Restart the machine (5) and activate the trigger of the
trigger gun (11). Let the machine run until no more water
runs through the trigger gun (11)
3. Stop the machine, unplug and wind up hose and cable.
4. Place trigger gun (11), lance (13), nozzles (14-18) and other
accessories in the holders of the machine. The hook (3) can
be used for storage of the hose (10) and cord (2)
EN
Instruction manual
Should the machine by mistake be frozen, it will be neces-
sary to check it for damage.
WARNING: Never start up a frozen machine. Frost damages
are not covered by the guarantee!

Environmental protection

Old appliances contain valuable materials that can be recy-
cled. Please arrange for the proper recycling of old applian-
ces. Please dispose your old appliances using appropriate
collection systems.
Maintenance, cleaner and repair
WARNING! Always disconnect the electrical plug from the
socket prior to maintenance or cleaning.
To ensure a long and problem free working life, please take
the following advice:
• Wash out water hose, high pressure hose, spray lance and
accessories before mounting
• Clean the connectors of dust and sand.
• Rinse the detergent spraying attachment after use.
• Clean the nozzles.
Any repair should always be made in an authorized works-
hop with original spare parts
Cleaning of inlet filter
Clean the water inlet filter regularly once a month or more
frequently according to use.
Carefully loosen the filter with a screwdriver and clean it
(see section 3.1). Check that it is intact before re- mounting
it.
The inlet filter must always be fitted inside the water inlet
pipe to filter out sand, limestone and other impurities, as
they will damage the pump valves.
Ref: 08710