Electrical Safety - EDM Product 08710 Manuel D'instructions

High pressure washer
Safety warnings
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or se-
rious injury. Save all warnings and instructions for future reference.
max 45ºC
Gerneral power tool safety warnings
1) Work area safety
a) Keep work area clean and well lit. Clu-
ttered and dark areas invite accidents.
b) Do not operate power tools in explo-
sive atmospheres, such as in the pre-
sence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmo-
dified plugs and matching out- lets will
reduce risk of shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
EN
Instruction manual
diators, ranges and refrigerators. There
is an increa- sed risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering the
power tool will increase the risk of elec-
tric shock. d) Do not abuse the cord. Ne-
ver use the cord for carrying, pu- lling
or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool out-
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of elec-
Ref: 08710