EDM Product 08710 Manuel D'instructions page 28

High pressure washer
Safety warnings
b) Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power
source and/or the bat- tery pack from
the power tool before making any ad-
justments, changing accessories, or
storing power tools. Such preventative
safety measures reduce the risk of star-
ting power tools acciden- tally.
d) Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instruc- tions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for mi-
salignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tools
operation. If damaged, have the power
tool repaired before use. Many acci-
dents are caused by poorly maintained
power tools.
EN
Instruction manual
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordan- ce with these
instructions and in the manner inten-
ded for the particular type of power
tool, taking into account the working
conditions and the work to be perfor-
med. Use of the power tool for opera-
tions different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool serviced by
qualified repair person using only iden-
tical replacement
parts. This will ensure that the safety of
the power tool is main- taine
Ref: 08710