Montiss Chicago Mode D'emploi page 18

THE PRODUCT
1. Charger
2. Bolt
3. Nut
4. Air inlet
5. Button to unlock dust container
6. Indication light power
7. On/off switch hand vacuum cleaner
8. Motor
9. Air outlet
10. Sealing ring
11. HEPA-filter
12. Plastic cover filter
13. Dust container
14. Rubber nozzle
15. Oval brush
ASSEMBLY

Remove all packaging materials.

Clean the device with a wet cloth and some detergent if necessary (also see the paragraph "maintenance and cleaning").

Make sure that all parts are clean and dry before assembling the appliance.
1. Place the nut into the hole at the top of the main unit (Fig. 1).
2. Attach the handle to the main unit (Fig. 2).
3. Place the bolt at the backside in the handle and turn the bolt clockwise to tighten it(Fig. 3).
4. Push the lock button turbo brush (28) while u place the main unit on the turbo brush (17) (Fig. 4).
16. Crevice nozzle
17. Turbo brush
18. Main unit
19. Handle
20. On/off switch stick vacuum cleaner
21. Indication light charging
22. Charge point charger
23. Button to unlock hand vacuum cleaner
24. Lock button hand vacuum cleaner
25. Electrode
26. Roll brush
27. Electrode
28. Lock button turbo brush
29. Button to unlock roll brush
30. Plastic cover roll brush
18