SOUNDMASTER UR-2010 Mode D'emploi page 17

steady.
•
Press <MODE> once to confirm the current setting and it switches to set the
SDA.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed
and it switches to auto-run mode automatically.
Set the SDA
•
Press <MODE> once in date setting mode.
•
The date & 'SDA' goes flashing alternative.
•
Press <UP> or <DOWN> to set the Special Date.
•
Press < SDA MODE > to ignore the year.
•
Press <MODE> once to confirm the current setting and go to set the automatic
update ON/OFF.
•
Press <M1-M5> to select the number of SDA
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed
and it switches to auto-run mode automatically.
In case of ignore the year the SDA will be active ever year at same date
Switching automatic update ON/OFF
•
Press <MODE> once in SDA setting mode.
•
The display show 'UPDATE' press <UP> or <DOWN> to switch update ON or
OFF.
•
The indicator "
•
The indicator "
received.
•
Press <MODE> once to confirm the current setting and go to set the dimmer
ON/OFF.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed
and it switches to auto-run mode automatically.
Switching dimmer ON/OFF
•
Press <MODE> once in the automatic update setting mode.
•
The display show 'DIM ON' or 'DIM OFF'.
•
Press <UP> or <DOWN> to switch dimmer ON or OFF.
•
Display show 'DIM ON' the display is illuminated for 10 seconds, when any key
had been pressed.
•
Display show 'DIM OFF' the display is illuminated for all time.
•
Press <MODE> once to confirm the current setting and it switches to auto-run
mode.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed
and it switches to auto-run mode automatically.
The Cooking Timer (Radio Off)
•
Press <TIMER> to enter the timer mode.
•
Press <M1> once, display shows '00:00 T1' goes solid or the previous value of
the memory-1 goes solid in the LCD.
" disappears, the update function is switch OFF.
" flashes. The time will be updated the next RDS time signal is