Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not operate machine before having read
the operating instructions, understood all
the notes and assembly the machine as
described here.
Keep the instructions in a safe place for future use.
C
C
Symbols machine / operating manual
Extent of delivery
Proper use
Residual risks
Safe working
Start-up
Working with the log splitter
Maintenance and care
Guarantee
Possible problems
Technical data
Declaration of Conformity
Spare parts
S
y
m
b
o
S
y
m
b
o
Read the operating and safety instructions
thoroughly before commissioning the
machine.
Wear safety shoes when working with the
machine to protect the feet from falling
logs.
Wear safety gloves when working with the
machine to protect the hands from chips
and splinters.
Wear safety goggles when working with
the machine to protect the eyes from chips
and splinters.
Do not remove or modify any protection or
safety devices.
Nobody else should be in the working area
of the machine other than the operator.
Keep other persons or animals out of the
danger area (minimum distance 5 m).
Danger of being cut or trapped; never
touch any dangerous parts when the
splitting wedge is in motion.
Caution!
Always note when the log ram is in
motion.
o
n
t
e
n
t
s
o
n
t
e
n
t
s
l
s
m
a
c
h
i
n
e
l
s
m
a
c
h
i
n
e
9
9
230 V – 240 V
9
9
10
11
11
13
14
15
15
60
61
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier
or the manufacturer immediately. Complaints made at a later
date will not be acknowledged.
The log splitter must only be used for splitting logs.
Only straight-cut logs are suitable for use with the log
splitter.
Metal parts (nails, wire etc.) must be removed from logs
before splitting.
Every other form of use is considered improper use. The
manufacturer accepts no liability for any damages
resulting from improper use, and any risk is in this case
borne solely by the user.
Even if used properly, residual risks can exist even if
the relevant safety regulations are complied with due to the
design determined by the intended purpose.
Residual risks can be minimised if the "Safety information"
and the "Intended usage" as well as the whole of the
operating instructions are observed.
9
Caution!
Never remove a log jammed against the
wedge by hand.
Caution!
Before starting any repair, maintenance or
cleaning work, always switch off the motor
and remove the plug from the socket.
Caution!
Ensure that the voltage of the power
supply matches that shown on the type
designation plate.
Stop!
Follow the operating instructions.
Open the bleed screw
Bleeding Page 12
E
x
t
e
n
t
o
f
d
e
l
i
v
e
E
x
t
e
n
t
o
f
d
e
l
i
v
e
P
r
o
p
e
r
u
s
e
P
r
o
p
e
r
u
s
e
R
e
s
i
d
u
a
l
r
i
s
k
s
R
e
s
i
d
u
a
l
r
i
s
k
s
r
y
r
y
Publicité
Table des Matières
