Alarm Time Setting - TFA PRIO Mode D'emploi

TFA_No. 30.3069_Anleitung
PRIO – Wireless Thermometer
• You can now see the maximum value for the outdoor tempera-
ture since the start-up or the last reset with time and date of
recording.
• Press the MAX/MIN button again. The minimum outdoor tem-
perature value appears. Repeat the process for the indoor val-
ues.
• Press the MAX/MIN button again to return to normal mode.
• The device will automatically quit the MAX/MIN mode if no but-
ton is pressed for 10 seconds.
• To clear the recorded maximum or minimum readings manually,
press and hold the – button for three seconds while the maxi-
mum or minimum values are displayed.
7.3 Trend indicator
• The trend arrows on the display indicate if the values are
increasing or decreasing. If the values remain the same, there is
no display.

7.4 Alarm time setting

• Press and hold the TIME ALARM button for three seconds to
enter the setting mode. The alarm symbol and ALM ON appear
on the display.
• The hour digits flash.
• Press the + or – button to set the desired time.
• Confirm the setting with the TIME ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the TIME ALARM button.
• The current time and the alarm symbol appear on the display.
• The alarm is activated.
7.4.1 Activate and deactivate the alarm
• To activate and deactivate the alarm function press the TIME
ALARM button in normal mode.
26
21.04.2020 15:00 Uhr Seite 14
PRIO – Wireless Thermometer
• The last adjusted alarm time appears for 2 seconds on the dis-
play.
• The alarm symbol and ALM ON appears on the display, if the
alarm is activated.
• ALM OFF appears on the display, if the alarm is deactivated.
• Wait some seconds until the display returns to normal mode to
confirm the setting.
• When the alarm is activated, the alarm starts to ring when the
set alarm time is reached.
• Press any button (except TIME ALARM ) and the alarm will stop.
• If the alarm is not stopped manually, the alarm tone automati-
cally turns off after two minutes and will be reactivated at the
same set time on the following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the TIME ALARM button and the
snooze function is activated.
• The alarm will be interrupted for 10 minutes. The alarm symbol
flashes on the display and the time display counts down until
the next alarm.
7.5 Outdoor temperature alarm
• Press and hold TEMP ALARM button in normal mode.
• MAX and the temperature alarm symbol appear. OFF flashes.
• Press the + or – button to activate the function.
• 60°C (default) or the last adjusted upper outdoor temperature
limit appears and ON flashes on the display.
• Confirm with the TEMP ALARM button.
• Press the + or – button to set the desired upper limit while the
indication flashes.
• Confirm the setting with the TEMP ALARM button.
• MIN and the temperature alarm symbol appear. OFF flashes.
• Press the + or – button to activate the function.
27