Trouble Shooting - Signature 4P Instructions D'utilisation

Note:
Plastic becomes brittle and susceptible to breakage when exposed to subzero
temperatures. Freezing can severely damage the spa. Improper winterization of your spa may void
your warranty.

TROUBLE SHOOTING

Here are some helpful tips to help you to diagnose and rectify some common sources of trouble.
Problems Probable causes
Bubble system does •
not operate •
Heating system does •
not operate •
•
•
Filtering system •
does not operate •
•
Spa leakage •
Water not clean •
•
•
Display temperature •
is higher than 42
degrees, after
stopping heating
function
•
Air pump is too hot
Something is wrong with the
power box
Temperature set too low
Dirty filter cartridge
Improper water levels
Heating element failed
Dirty filter cartridge
Something is wrong with the
power box
Too low voltage or incorrect
frequency
Spa is torn or punctured
Insufficient filtering time
Dirty filter cartridge
Improper water maintenance
The display temperature may
suddenly rise because the
residual water in heating tank
will be continue heated by
residual temperature.
Inlet blocked
Solutions
• Unplug the air pump. After the air
pump has cooled, insert the plug
and press the
activate.
• Call for service if it does not reset.
• Set to a higher temperature
(20-42°C).
• Clean/replace the filter cartridge in
time.
• Add water to specified levels.
• Call for service.
• Clean/replace the filter cartridge in
time.
• Call for service if it does not reset.
• Ask professional electrician to check
whether the household input voltage
or frequency is normal
• Use provided repair patch
• Increase filtration time.
• Clean/replace the filter cartridge.
• Refer to the chemical manufacturer's
instructions.
• The temperature will return to normal
few mintues later.
• Clean the inlet
- 22 -
Bubble button to