Elcometer 112 Guide D'utilisation page 4

1 OVERVIEW
Elcometer 112, 3236
& 112AL
Elcometer 154
Elcometer 115
Elcometer 3238
Elcometer 3230
Elcometer 3230
(Coil Coating)
a
The Elcometer 112AL can be customised with your logo. Please contact Elcometer or your local
Elcometer supplier for further information.
www.elcometer.com
WET FILM COMBS
Precision formed, long lasting and reusable hexagonal stainless steel
wet film combs. Available in a range of thicknesses measuring up to
3000μm (120mils) with 24 or 36 measurement steps depending on
the comb.
An aluminium version of the Elcometer 112 is also available, the
a
Elcometer 112AL . Supplied in packs of 10, each aluminium comb
has Metric (25 - 3000μm) on one side and Imperial (1 - 118mils) on
the other.
Made from ABS plastic designed to be used once and kept as a
record of wet film thickness measurement for quality assurance or
customer requirements. Supplied in packs of 500, each comb has
Metric (50 - 800μm) on one side and Imperial (7 - 32mils) on the
other.
Precision formed, long lasting and reusable stainless steel wet film
combs. Four separate wet film thickness ranges are available up to a
maximum of 1250µm (50mils) and each comb has 10 measurement
steps (teeth).
Similar to the Elcometer 115, the Elcometer 3238 provides the user
with more measurement steps (teeth) - 24 per comb. Three separate
wet film thickness ranges are available up to a maximum of 1200µm
(48mils).
WET FILM WHEELS
The Elcometer 3230 wet film wheel consists of a central eccentric
wheel and two outer concentric wheels. The diameter of the outer
wheels is greater than that of the central wheel. By rolling the gauge
through a wet coating, the centre wheel eventually touches the film.
This point on the scale indicates the thickness. Various wet film
thickness ranges are available up to a maximum of 1000µm (40mils).
Similar to the Elcometer 3230 but the outer wheels are knurled to
allow measurements to be taken on slippery coatings or on fast
moving substrates. Two separate wet film thickness ranges are
available; 0 - 50μm (0 - 2mils) and 0 - 100μm (0 - 4mils).
R
en-2