Safety Tips - Buffalo CT931 Mode D'emploi

UK

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Caution! Hot surface! Do not touch!
The temperature of cooking surface maybe high when the
appliance is operating.
• DO NOT immerse the appliance in water.
• DO NOT clean with jet/pressure washers.
• DO NOT move or carry the appliance when it is switched on.
• DO NOT leave the appliance unattended during operation.
• Always use oven gloves when cooking or carrying out any
adjustments to the appliance.
• Do not obstruct any ventilation openings in the appliance
body.
• During and after cooking, the unit is still hot. Never touch the
surface to avoid scalding.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• This appliance must only be used in accordance with these
instructions and by persons competent to do so.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
2
CT931_ML_A5_v2_20200326.indb 2 2020/3/26 15:13