IMEON ENERGY 3.6 Guide De Montage page 88

IMEON INVERTER
8.2.8 Clearance and maintenance for anti-dust kit (IMEON 9.12 only)
Step 1: Please rotate the dust screen screw on the left side of the machine counterclockwise
FR
FR
EN
ES
IT
Step 2: Then, dustproof case can be removed and take out air filter foam as shown in below chart.
Step 3: Clean air filter foam and dustproof case. After clearance, re-assemble the dust-kit back to the
inverter.
NOTICE: The anti-dust kit should be cleaned from dust every one month.
88
IMEON_installation_guide_rev.D.5