IMEON ENERGY 3.6 Guide De Montage page 63

IMEON INVERTER
Insulate the cable on a length « L » of 6 to
7,5mm
Visually check the crimp
Step 5: Connect each input to the corresponding mounted connector of the inverter.
Connect negative pole (-) of connection cable to negative pole (-) of PV input connector.
Connect positive pole (+) of connection cable to positive pole (+) of PV input connector.
IMEON 3.6 (1 input)
Insert the striped cable on the crimping tool, then
press
Insert the crimped-on contact into the insulator of
the male or female coupler until it clicks into place.
Pull gently on the lead to check that the metal part is
correctly engaged.
PV1 Input
IMEON_installation_guide_rev D.5
IMEON 9.12 (2 inputs)
FR
FR
EN
ES
IT
PV2 Input
63