Battery And Battery Charger; Product Features - stayer HDBL181K Instructions D'emploi

This manual is consistent with the date of manufacture
of your machine, you will find information on the
technical data of the machine acquired manual check
for updates of our machines on the website:
www.grupostayer.com
1_MACHINE-SPECIFIC SAFETY
WARNINGS
Working safely with this machine is
possible only when the operating and
safety information are read completely
and the instructions contained therein are
strictly followed. In addition, the general
safety notes in the enclosed booklet must be
observed. Before using for the first time, ask for a
practical demonstration.
Wear protective glasses and hearing protection. For
long hair, wear hair protection. Work only with closely
fitting clothes. Before each use, check the machine
and battery. If damage is detected, do not use the
machine. Have repairs performed only by a qualified
technician. Never open the machine yourself.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as when
transporting and storing, always set the rotational
direction switch to the centre position. Otherwise
danger of injury is given when unintentionally actuating
the On/Off switch.
Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
Convince yourself before using that the battery is
securely seated in the machine.
Do not strain the machine so heavily that it comes to
a standstill.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance.
Operate the machine only with the auxiliary handle 10.
Hold the power tool only by the insulated gripping
surfaces, when performing an operation where the
cutting tool may run into hidden wiring.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
Use appropriate detectors to determine if utility
lines are hidden in the work area or call the local
utility company for assistance.
Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage.
Be careful when screwing in long screws; danger of
sliding off.
Set the machine against the screw/nut only when
switched off.
When screwdriving, operate in first gear as well as with
a low speed.
Always switch the machine off and wait until it has
come to a standstill before placing it down.
Never allow children to use the machine.
Stayer is only able to ensure perfect operation of the
machine if the original accessories intended for it are
used.

Battery and Battery Charger

The enclosed operating instructions for the battery
charger must be read carefully!
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Allow a heated battery to cool before charging.
Protect the battery from heat and fire: Danger of
explosion! Do not place the battery on radiators
or expose to strong sun rays for a longer time;
temperatures over 50 °C cause damage.
Do not open the battery, and protect it from impact.
Store in a dry and frost-free place.
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Do not dispose of the battery in household waste or
discard into fire or water.
2_FUNCTIONAL DESCRIPTION

PRODUCT FEATURES

1 Dust protection cap
2 Locking sleeve
3 Depth stop
4 Push-button for depth-stop adjustment
5 Impact stop switch
6 On/Off switch
7 Rotational direction switch
8 Battery
9 Battery unlocking button
10 Auxiliary handle
11 Clamping handle
- 15 -
es
it
gb
de
fr
p
cz