Automatic Programs - Linea 2000 DOMO Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
6.
Put the deep fryer with the filled roaster back in the device.
7.
Press the on/off button to make the desired settings.
8.
Set the desired timer (up to 30 minutes) using the timer setting arrows. You can see which timer is
selected on the display.
9.
Set the desired temperature (80°C-200°C) using the temperature setting arrows. You can see which
temperature is selected on the display.
10. Press the on/off button to start. The motor in operation symbol will appear on the display. The motor
in operation symbol remains visible on the display as long as the appliance is switched on. The set
timer and temperature appear alternately on the display.
11.
You can take the fryer basket out of the appliance in between to shake up the ingredients or to check
how fried your food is. The appliance stops working automatically and will continue working (if the
set time has not yet elapsed) when you slide the fryer basket back into the appliance.
12. At the end, a bell will ring to indicate that your food is ready. The unit then switches off
automatically. You can also turn it off earlier by pressing the on/off button.
13.
Remove the deep fryer from the appliance and place it on a heat-resistant holder. You can put the
food in a bowl or take it out of the deep fryer with heat-resistant tongs that do not scratch the non-
stick coating of the deep fryer.
COMMENTS
·
An acoustic signal is emitted for each setting you set on the device.
·
You can adjust the set temperature or time at any time while the unit is in operation.
·
Excess oil is collected in the deep fryer.
·
If your food is not ready after the set time has elapsed, you can always switch the appliance back on
for a few minutes.
·
After the appliance has been switched off, it will continue to run for a while to cool down. Then a beep
sounds to indicate that the appliance is now completely off.
·
There is no need to preheat the appliance. You can add three minutes to the desired baking time if
necessary for frozen products.
·
If you just want to warm something up in the device, you can set it to 150°C for 10 minutes.

AUTOMATIC PROGRAMS

The device has 8 automatically set programs. To set one of these, press the mode knob until you have
selected the desired program. Press the on/off button to activate this program. At the end, a bell will ring
to indicate that your food is ready. The unit then switches off automatically.
french fries
pork
15 min.
25 min.
200 °C
180 °C
These programmes are only given as an indication. The results depend on the size, shape and amount of
the food.
www.domo-elektro.be
fish
shrimp
20 min.
20 min.
160 °C
160 °C
chicken
cake
20 min.
30 min.
200 °C
160 °C
steak
pizza
20 min.
20 min.
180°C
170 °C
DO1095FR
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Do1095fr

Table des Matières