Main Unit - Omnitronic CMP-462 Mode D'emploi

4.2 Main unit

Frontpanel:
1. POWER SWITCH
Press this button to start operation.
2. DISC-TRAY
To enter the disc. Please refer to the explanations under 6.2 CD-tray.
3. OPEN/CLOSE BUTTON
Via the Open/Close-button, you can open and close the CD-tray.
Rear panel:
4. AC CONNECTION
5. VOLTAGE SELECTOR
Make sure that the indication corresponds to the available voltage.
6. AUDIO OUT-SOCKETS
The music-signal of these sockets is analogue. Connect the output to the respective input of your mixer.
7. DIGITAL OUT-SOCKET
The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for
example.
8. REMOTE CONTROL
Connect the controller via this plug.
21/53
10602401_V_1_0.DOC