Data Plate - Bartscher 347107 Manuel D'installation

CONTENTS
1. INTRODUCTION
2. TECHNICAL DATA
3. INSTALLATION AND COMMISSIONING
4. MAIN RULES
5. USE OF THE APPLIANCE
6. DISPOSAL AND RECYCLING OF THE APPLIANCE
1. INTRODUCTION
This section shows the symbols and provides information about the model of the appliance, the various responsibilities and the copyright.
It concerns heated cupboards.
For further information refer to paragraph "Technical data" (2).

DATA PLATE

Serial number
Model
description
Power
supply voltage
Power supply frequency Max. power input

The data plate shows the identification and technical data of the product.

The data plate is inside the appliance on the right upper part of the heating panel.
WARNING!
The present handbook is intended solely for consultation by the operator. Its content could be modified without notice. The Manufacturer reserves the right to
stop the manufacturing of any model and/or introducing product changes but is not obliged to change products delivered before the modification and declines
all responsibilities for any inaccuracy may appear on this handbook related to printing or translation mistakes.
The company cannot assume liability for damage and faulty operation due to:

Failure to obey the instructions of this handbook;

Modification or appliance alteration;

Maintenance by unspecialized technicians ;

Insufficient maintenance;
Week
Year
Type: 2015 42 29
Art.: Heated cupboard
220-240 Vac 1N
50-60Hz – 2000 W
CEI EN 60335-1
Number of phases

Do not remove, tamper with or erase the "CE" mark of the appliance.

Refer to the data on the "CE" plate of the appliance in all communication with the
Manufacturer (for example: when asking for spare parts, etc..)

The "CE" plate has to be destroyed while scraping the appliance.
Progressive no.
IPX4
Liquid protection level
EN
7