Disposal; Manufacturer's Warranty - Hilti DD VP-U Mode D'emploi

Fault
The pump doesn't start.
en
The pump switches itself
off.
The water separator con-
tainer cannot be removed.

10 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled.
The materials must be correctly separated before they can be recycled. In many countries, Hilti
has already made arrangements for taking back old tools and appliances for recycling. Ask Hilti
customer service or your Hilti representative for further information.

11 Manufacturer's warranty

Hilti warrants that the tool supplied is free of
defects in material and workmanship. This war-
ranty is valid so long as the tool is operated and
handled correctly, cleaned and serviced prop-
erly and in accordance with the Hilti Operating
Instructions, and the technical system is main-
tained. This means that only original Hilti con-
sumables, components and spare parts may
be used in the tool.
This warranty provides the free-of-charge re-
pair or replacement of defective parts only over
the entire lifespan of the tool. Parts requiring
repair or replacement as a result of normal wear
and tear are not covered by this warranty.
Additional claims are excluded, unless strin-
gent national rules prohibit such exclusion.
8
Possible cause
Electric power failure.
The pump is defective.
The overheating cut-out has
been activated.
The system is still under vac-
uum.
In particular, Hilti is not obligated for di-
rect, indirect, incidental or consequential
damages, losses or expenses in connection
with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied
warranties of merchantability or fitness for a
particular purpose are specifically excluded.
For repair or replacement, send the tool or
related parts immediately upon discovery of
the defect to the address of the local Hilti
marketing organization provided.
This constitutes Hilti's entire obligation with
regard to warranty and supersedes all prior
or contemporaneous comments and oral or
written agreements concerning warranties.
Remedy
Check the fuses and cables.
Check the position of the
switch.
Check that the electric supply
voltage complies with the de-
tails given on the rating plate.
Return the appliance for repair.
Allow the appliance to cool
down. The appliance switches
on again automatically.
Check the ventilation slots and
clean them if necessary.
Check the operating voltage.
Release the pressure by con-
necting the hose to the vac-
uum baseplate.