Bresser P Mode D'emploi page 14

BINOCULARS
List of Parts
B
Centre axle
C
a Twist-up eyecups
or
C
b Rubber eyecups
D
Dioptre adjustment
E
Body of the binoculars
F
Lens tube
Central focussing wheel
G
H
Eyepiece
I
Objective lens
J
Threaded tripod connection
1)
Image circle with correctly set eye dis-
tance
Eyepieces for spectacle wearers
Depending on the model, your binoculars
are equipped with either twist-up eyecups
(2a) or rubber eyecups (2b). Since there is
a larger distance between the binocular
eyepiece and the pupil for those wearing
glasses, both eyecup varieties can be ad-
justed individually.
14
Twist-up Eyecups (2a)
Screw in the twist-up eyecups (2a) to use
the binoculars while wearing glasses. If you
are not wearing glasses, unscrew the eye-
cups to achieve the required distance from
the pupils.
OR
Rubber Eyecups (2b)
To use the binoculars while wearing glass-
es, turn the rubber eyecups (2b) towards
the sides and down. If you are not wearing
glasses, leave the eyecups in the upright
position to achieve the required distance
from the pupils.
Adjusting the eyepiece distance
P R C
The distance between the eyes differs be-
tween individuals. To achieve perfect inter-
action between your eyes and the eyepiec-
es of your binoculars set the angle at the
centre of the binoculars (1) so that you see
a circular image (10). Note this setting for
later use.
P R C