Maxspect Gyre XF130 Mode D'emploi page 19

Alternating Gyre Mode – Flow Pattern Explained
1. Depends on the way the rotors and flow cages are installed, the Gyre
System could create a variety of different gyre flow patterns.
2. The following diagram illustrates the default setup of rotors and flow
cages, or known as the "A-B Combination".
Flow Cage Type A
3. Gyre flow pattern using default "A-B Combination":
Spinning in normal – water
is drawn in from underneath and
pushed out horizontally.
Spinning in reverse – water
is drawn in horizontally and
disperse out
creating turbulence.
Rotor Type A
downwards
Operating Instructions
Rotor Type B Flow Cage Type B
English
18