Maxspect Gyre XF130 Mode D'emploi page 18

English
9. There are 10 settings to assign, from 2 minutes, 5 minutes, 10 minutes,
15 minutes, 30 minutes, 1 hour, 2 hours, 4 hours, 6 hours and 12 hours,
as shown on the markings above the dial.
10. For example, we will set the duration to 5 minutes as illustrated in the
following diagram.
11. The following diagram illustrates the water flow pattern when the
normal water flow speed
alternating every 5 minutes.
100%
80%
60%
40%
20%
0%
-20%
-40%
-60%
17
Alternating Gyre Mode
Normal water flow
Reverse water flow
5
Operating Instructions
is 70%, reverse water flow speed
10 15
Time (min)
is 40%, and
20 25