Technical Data; Specified Conditions Of Use; Emergency Procedure - Güde 2T Traduction Du Mode D'emploi D'origine

ENGLISH
6

Technical Data

Support frame set
Art. No
Max. load-bearing capacity
Working height
Weight
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
WARNING Read all safety warnings and all
instructions.
Save all warnings and instructions for future
reference.

Specified Conditions Of Use

The support frames may be used only for supporting
vehicles.
Do not use the supporting frames as a ladder, stool or
similar object.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Safety Warnings Support frame set
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Keep your work area clean and tidy. Untidy work-
places and workbenches increase the risk of accidents
and injuries.
Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
Do not overreach. Keep proper footing and balance
at all times.
Never load the support frames above the
rated lifting capacity.
2T
Use the support frames only in pairs, one
pair for each axle!
84119
2 t
Always place the support frames on a firm and level
surface and ensure their load-bearing stability.
277-365 mm
Secure the load to be lifted against rolling away and
3,2 kg
falling over.
Insert the support frames in the vehicle only at the
positions specified by the vehicle manufacturer.
Risk of injury
Staying under lifted load is strictly prohibited.
Never work under lifted load that is supported only
by the lifter. Lifted load must be secured / supported
by separate trestles or, as appropriate, brackets.
It is only possible to work on and under lifted vehicles
when they are sufficiently secured and supported to
make sure: they do not turn over and slip.
Make sure nobody is leaning against lifted vehicle or
lifted load.
Do not move the support frames when under load.
Have your device repaired only by qualified professi-
onal staff using original spare parts. This will ensure
that the safety of the power tool is maintained.
Tools which are not in used must be stored in a dry
place as high as possible out of the reach of children
or in an inaccessible place.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING / Caution!
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Wear gloves!
Wear safety shoes with steel reinforcement!