After Use - Sony MV-700HR Mode D'emploi

To turn off the power
Press (POWER) (or
commander) so that the green light of the
POWER switch on the player turns off.

After use

Turn off the player and disconnect the power
cord from the power source.
Note on using the player in the car
Using the player while the ignition key is in
ACC position and the engine is stopped may
cause the car battery to run down.
Notes
• Read the instruction manual supplied with the
disc to play with this player.
• Do not open the disc cover during playback.
• Depending on the recording method used on the
disc, it may take a minute or more before
playing.
• Depending on the condition of the disc, it may
not play back (page 40).
• A high-bit rate MP3 file such as 320 kbps may not
playback properly.
on the card remote
Operation for playback
To
Stop playback
Eject the disc
Pause
Go to the next chapter,
track, or scene
Go back to the preceding Press .
chapter, track, or scene
Fast forward/
fast reverse
Slow forward
(DVD/Video CD
only)/Slow reverse
(DVD only)
1 If the resume playback function is activated, you
*
can resume playback later by pressing u. For
details, see "Resume playback" (page 18).
2
* DVD/Video CD/Audio CD/MP3
"X" is displayed on the screen.
3 DVD/Video CD
*
No sound is output during fast forward or fast
reverse.
4 A MP3 disc returns to normal playback when a
*
MP3 file finishes.
Do this
1
Press x*
Press (PUSH OPEN)
on the player.
2
Press u *
Press again to
resume playback.
Press >
Press M/m while
3 4
playing* *
Each press changes
the playback speed
as follows: 2 times
of normal speed
t 4 times of normal
speed t 8 times of
normal speed t 16
times of normal
speed t 32 times of
normal speed t
normal playback
speed.
Press y/ while
playing
Each press changes
the playback speed
as follows: 1/2 times
of normal speed t
1/4 times of normal
speedt 1/8 times
of normal speedt
1/16 times of normal
speedt normal
playback speed.
17