Operating Instruction; Function; Target Group; Proper Use - Wenglor SD4RAS0 N89 Série Notice D'instructions

1. Operating Instruction

1.1. Function

• This operating instructions manual provides all the information you need for the mounting, set­up and
commissioning to ensure the safe operation and disassembly of the safety switchgear.
• The operating instructions must be available in a legible condition and a complete version in the vicinity of
the device.

1.2. Target group

• All operations described in this operating instructions manual must be carried out by trained specialist
personnel, authorised by the plant operator only.
• Please make sure that you have read and understood these operating instructions and that you know all
applicable legislations regarding occupational safety and accident prevention prior to installation and put­
ting the component into operation.
• The machine builder must carefully select the harmonised standards to be complied with as well as other
technical specifications for the selection, mounting and integration of the components.

2. Proper Use

This wenglor product has to be used according to the following functional principle:
Non-contact Safety Switch RFID
This non­contact, electronic safety switch is designed for application in safety circuits and is used for monitor­
ing the position of movable safety guards. In this application, the safety switch monitors the position of hinged,
sliding or removable safety guards by means of the coded electronic actuator.

3. Safety Precautions

3.1. Safety Precautions
• This operating instruction is part of the product and must be kept during its entire service life.
• Read this operating instruction carefully before using the product.
• Installation, start­up and maintenance of this product has only to be carried out by trained personal.
• Tampering with or modifying the product is not permissible.
• Protect the product against contamination during start­up.
Safety Switch RFID
23