Maintenance; Customer Service / Support; De-Commissioning; Drawings And Replacement Parts - ABNOX AXFP3 S10 Instructions De Service

EN

Maintenance

The indicated maintenance intervals are based on
single-shift operation. Depending on the use site,
medium and cases of multi-shift operation, main-
tenance may need to be performed more frequently.
WHEN WHAT
During every Check for
drum damage to
changeover the follower
plate.
Weekly Compres-
sed air
service
unit/filter.
Weekly Check
hoses and
fittings for
leaks.
Monthly Check for
damage to
the follower
plate.
Monthly Compres-
sed air
service
unit/filter.
CAUTION
All work on the plant absolutely must
be done when it is idle. The
pneumatic and hydraulic systems
must be de-pressurised. The
manometers must show 0 bar.
28
HOW WHO
visual Operating
company
technicians
Open the Operating
collecting company
bowl by technicians
hand and
drain any
water.
visual Operating
company
technicians
visual Operating
company
technicians
Clean Operating
the air company
filter. technicians

Customer Service / Support

ABNOX AG
Langackerstrasse 25
CH-6330 Cham
Switzerland
Tel. +41 (0) 41 780 44 55
Fax +41 (0) 41 780 44 50
E-Mail info@abnox.com
Internet www.abnox.com

De-Commissioning

Brief Interruptions:
In the event of short interruptions (overnight or just
over the weekend), shut down the product. The
system must be de-pressurised.
Long-Term Interruptions:
In the event of a longer-term interruption (more than
three days), the following points should be observed:
• The main switch must be shut down
• The system must be de-pressurised (check the
displays)
CAUTION
Risk of accident and danger to the
environment:
Grease / oil on the ground increase
the risk of accident.
The grease/oil must be properly
disposed of in compliance with
applicable national ordinances
(hazardous waste).

Drawings and Replacement Parts

Accessories, drawings, dimensioning sheets, data
sheets and replacement parts can be found at
www.abnox.com.