Understanding Traffic Data; Traffic Subscriptions; Customizing The Navigation System; System Settings - Garmin Map Pilot Manuel D'utilisation

time of arrival is influenced by the estimated delay time of
received traffic events.
Traffic Voice Prompts
You can listen to information about upcoming traffic on your
route.
Select Traffic > Hear Traffic Ahead.
The system reads all traffic events on your route.
Viewing Traffic Alerts
While you navigate a route, a traffic alert may appear.
1
Select Traffic > Notifications.
2
Select an alert.
Avoiding Traffic Events on Your Route
1
While navigating a route, select Traffic > Traffic on Route.
A list of traffic events appears, organized by their location on
the route.
2
Select an event.
3
Select Avoid Incident.
Viewing the Traffic Map
You can view traffic on the map at any time.
Select Traffic > Traffic Map.

Understanding Traffic Data

The traffic legend explains the icons and colors used on the
traffic map.
Select Traffic > Traffic Legend.

Traffic Subscriptions

NOTE: Traffic service is not available in all areas or regions.
Subscription Activation
You do not need to activate the subscription included with your
navigation system. The subscription activates automatically after
your system acquires satellite signals while receiving traffic
signals from the pay service provider.
Reactivating Your Subscription
NOTE: Subscriptions in Europe and North America may require
reactivation.
When your traffic subscription expires, a notification message
appears in the traffic menu. Contact your Mercedes-Benz center
or your traffic service provider in North America to reactivate the
subscription.

Customizing the Navigation System

1
Select Settings.
2
Select a setting category.
3
Select a setting to change it.

System Settings

Select Settings > System.
Audio Reduction: Select to automatically reduce the
entertainment audio source during navigation prompts.
Navigation Voice Prompts: Select to hear navigation voice
prompts.
Allow Prompts During Calls: Select to allow voice prompts
during a phone call.
GPS Simulator: When you are not driving, you can stop the
system from receiving a GPS signal and simulate a route
(Using the GPS Simulator, page
System Information: Select to view the software version
number, the unit ID number, and information on several other
software features.
Satellite Information: Select to view the satellite information
page.
MAP PILOT Owner's Manual
4).
Restore System Settings: Select to restore the system settings
to the factory default settings.

Navigation Settings

Select Settings > Navigation.
Route Preference: Select your preference for calculating
routes.
Avoidances: Sets road features to avoid on a route.
Advanced Detours: Sets the length of a detour.
Lane Guidance: Select to activate lane suggestions for
upcoming turns.
Restore Navigation Settings: Select to restore the navigation
settings to the factory default settings.
Route Preferences
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Select Settings > Navigation > Route Preference.
Faster Time: Calculates routes that are faster to drive but can
be longer in distance.
Shorter Dist.: Calculates routes that are shorter in distance but
can take more time to drive.
Less Fuel: Calculates routes that could use less fuel than other
routes. The system avoids roads that could use more fuel,
such as roads with high speed limits or steep hills.

Map Display Settings

Select Settings > Map Display.
Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Data Fields Layout: Sets the data that appears on the
map.
Color Mode: Sets the map background. Day for a light
background, Night for a dark background, or Auto to switch
between day and night mode depending on the day/night
settings on the Audio 20 CD.
Auto Zoom: Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
Highway Information: Shows upcoming services on the map.
This feature is not available in all areas or regions.
Map Layers: Sets the data that appears on the map page.
Restore Map Display Settings: Select to restore the map
settings to the factory default settings.

Traffic Settings

Select Settings > Traffic & Alerts.
Traffic: Enables traffic.
Speak Traffic Alerts: Sets the detail level of traffic alerts. Select
None, Basic, or Full.
NOTE: You must select a voice personality that can speak all
prompts to use this feature.
Subscriptions: Lists current traffic subscriptions.
Restore Traffic & Alerts Settings: Select to restore the traffic
and alerts settings to the factory default settings.

Language and Keyboard Settings

NOTE: The text language of the MAP PILOT follows the text
language of the Audio 20 CD and cannot be changed
separately. The text language of the MAP PILOT does not
change the language of user-entered data or map data, such as
street names.
Select Settings > Language.
7