ION EZ Vinyl/Tape Converter Guide D'utilisation page 3

Transferring Music to Your Computer
Once you have installed the software, you can start recording. Open EZ Vinyl/Tape Converter by going
to Start > All Programs > EZ Vinyl Tape Converter (Windows) or your Applications menu (Mac OS X).
Step 1
Once you start the software, you will see the
screen shown on the right.
Connect a USB cable from the USB device to an
available USB port on your computer. (This is
the only audio connection you need to make to
convert your vinyl or tapes using this software.)
Once the USB device is connected, click Next.
Note: If you are prompted to select your
playback device (Turntable or Tape Player),
check the appropriate box and click Next. If you
selected Tape Player, you will be prompted to
select the tape format, Normal or Chrome.
(Normal tapes are the most common, including
store-bought tapes and home recording tapes.)
Note: If you see a message that the software is
unable to recognize your USB device,
disconnect all other USB audio devices (USB
speakers, USB audio interfaces, webcams, etc.)
from your computer, then click Next again.
Please note that EZ Vinyl/Tape Converter can be
used only with products that included the EZ
Vinyl/Tape Converter software; it does not
support other hardware.
3