ION EZ Vinyl/Tape Converter Guide D'utilisation page 13

Problem
The sound from my USB
device's audio outputs
is distorted or full of
static.
In Windows 7 and
Windows 8, the text in
the EZ Vinyl/Tape
Converter window is
mis-aligned and the X
button in the upper right
corner has a white box
around it.
Cause
Line/phono-level switch
may not be set properly.
Your Display settings are
not set to 100%.
Solution
Turntables only: If your USB device has a
line/phono switch on its rear panel, make sure it
is set to the appropriate level for the inputs to
which it is connected ("line" or "phono"). If your
USB device does not have this switch, please
see the Quickstart Guide that came with the
product to determine whether it is line- or
phono-level.
Note: You do not need to connect your USB
device to a speaker system, receiver, etc. for EZ
Vinyl/Tape Converter to convert your music. You
only need to connect it to your computer (using
a USB cable).
Open Windows's Control Panel, select
Appearance and Personalization, and select
Display. Change the magnification to 100% and
click Apply. After that, sign out of your
computer and sign back in.
13