Symbols - RIDGID R09894 Manuel D'utilisation

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Eye, Ear and Head Protection
Keep Hands Away
Wet Conditions Alert
Recycle Symbol
V Volts
A Amperes
Hz Hertz
min Minutes
Direct Current
n o No Load Speed
.../min Per Minute
MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1.
Always wear other personal protective equipment such as hearing
protection and a hard hat when needed.
Keep hands and body away from the discharge area of the tool.
Do not expose to rain or use in damp locations.
This product uses lithium-ion (Li-ion) batteries. Local, state or federal
laws may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information regarding available recycling and/
or disposal options.
Voltage
Current
Frequency (cycles per second)
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits, etc., per minute
DESIGNATION/EXPLANATION
6 – English