Pool Preparation; Operation - Kokido Telsa 90 Manuel D'utilisation

Pool Preparation

- If the liner is brittle, damaged, or wrinkled, contact a qualified professional to perform
the necessary repairs or perform a liner replacement prior to using the pool vacuum .
- If you are using a saltwater pool, make sure all salt are dissolved before placing the
pool vacuum into the water.

OPERATION

1) Bring your pool vacuum to the side of your pool. Turn the switching knob clockwise
until it clicks to expose the water sensors. The light at the top will turn blue.
Immerse the pool vacuum into water, the light turns immediately to green and the
impeller will start to turn after 4-5 seconds.
While holding the cord, press on the cord fastener and push
it under the flange.
TIPS: To secure the filter bag, when pushing the cord
fastener under the flange, pull one cord instead of two cords
as shown in diagram
Lift up the bag to ensure it is totally secured before deploying
the pool vacuum into water.
12