Side Extension Disassembly; Handle/Telescopic Pole Connector Assembly; Filter Bag Assembly - Kokido Telsa 90 Manuel D'utilisation

Side extension disassembly

Reverse the steps to disassemble the extension from the main unit.

Handle/Telescopic pole connector assembly

Align and insert the handle/ pole connector into the post as shown. Slide the telescopic
pole into the pole connector until the holes on the side of the telescopic pole are
secured to the pins of the pole connector.

Filter bag assembly

Note: if the pool is too dirty with fine sand and mud, use fine filter bag.
Spread the filter bag over the top opening of the main body
of the pool vacuum. Make sure the cord of the bag is placed
under the flange of the top opening.
11