Getting Started; Turning The Camera Off - T'nB S20 Mode D'emploi

EN

GETTING STARTED

Welcome to this user guide for your new SPCAMS20 camera.
Charging the battery
For best use of the camera, fully charge it before first use.
Connect the camera using the supplied USB cable (4). The red LED (6) will light
up while the camera is being charged.
The battery will fully charge in about 3 hours.
Micro SD Card
A micro SD card (sold separately) is required for filming and photography. Use
brand named memory cards that meet the following specifications:
- Micro SD, micro SDHC or micro SDXC
- Class 10 or UHS-I
- Minimum capacity 8GB, maximum 32GB
Insert the memory card into the dedicated port (5).
Power on and off
– TURNING THE CAMERA ON
Press and hold the ON / OFF button (1) for 3 seconds. The opening screen
appears, and a blue LED blinks on the camera button (2).

– TURNING THE CAMERA OFF

Press and hold the ON / OFF button (1) for 3 seconds. The device closing screen
will appear.
Screen navigation
The screen displays the following information related to modes and settings.
The settings displayed vary depending on the mode.
Camera Schematics
1. Video / Photo / Playback Mode
2. Resolution
3. Available space on SD card
4. Battery status
5. Microphone on/off
6. Date
7. Time
ICE_SPCAMS20.indd 7 ICE_SPCAMS20.indd 7 16/06/2020 12 16/06/2020 12