Sony Aplha ILCE-9M2 Mode D'emploi page 60

Connecting the camera to a wireless
access point
Connect the camera to your wireless access point. Before starting the
procedure, make sure you have the SSID (name of the access point) and
password of your wireless access point with you.
1
MENU 
[Access Point Set.].
2
Use the control wheel to select the access point to which you
want to connect. Press the center of the control wheel and enter
the password for the wireless access point, then select [OK].
Note
• If a connection is not established, see the wireless access point operating
instructions or contact the administrator of the access point.
To save images to a computer, install PlayMemories Home on your computer.
PlayMemories Home
https://www.sony.net/pm/
GB
60
(Network)  [Wi-Fi Settings] 