Italian Institute for the Certification of Personal Protective Equipment
Verifications for anchor devices according to the Standards EN 795:2012 "Personal fall
protection equipment – Anchor devices", CEN/TS 16415:2013 "Personal fall protection
equipment – Anchor devices – Recommendations for anchor devices for use by more
than one person simultaneously" and UNI 11578:2015 "Anchor devices intended for
Date:
Applicant:
Note 1: The Attestation of Conformity loses its validity if any modifications are made as compared with the original and tested product.
Note 2: Dolomiticert only allows partial disclosure of the present Attestation of Conformity upon written authorization.
Note 3: This Attestation of Conformity issued by Dolomiticert under a voluntary basis.
Note 4: Standard requirements applicable to the Product but not evaluated by Dolomiticert are outside the scopes of the present
Attestation of Conformity.
Note 5: The present Attestation of Conformity deletes and substitutes the Attestations of Conformity number 170664 and
170722 issued in date 05/02/2019.
46 FRANÇAIS
Address: Villanova Zona Industriale, 7/A
32013 LONGARONE ( BL ) - ITALY
Tel.: +39 0437 573407
Web site:
www.dolomiticert.it
ATTESTATION OF CONFORMITY
permanent installation"
Binario R27 LongSpan
Responsible for the evaluation
HARKEN ITALY SPA
Via Marco Biagi, 14 - 22070 LIMIDO COMASCO CO – Italy
S.C.A.R.L.
Fax: +39 0437 573131
E-mail:
info@dolomiticert.it
number 200925
Anchor device
Model:
th
14
of July 2020
Luca Tamburlin
Page 1 / 5
26/05/2020