HumanTechnik Lisa DS-1/RF Mode D'emploi page 11

Congratulations on purchasing your
alarm clock lisa DS-1/RF. You have
selected a modern and reliable
system.
The alarm clock lisa DS-1/RF is an
electronic clock with a digital time
display. It wakes you up with an
acoustic signal which is adjustable
in audio frequency and volume.
The following accessories can be
connected to the alarm clock:
- Vibrating pillow
- Flash module
- Switch module
- Acoustic module
Standard components
Please check if all following compo-
nents are included:
- lisa DS-1/RF
- 9 V power supply unit
- Warranty card
Installation
Connect the power supply unit to the
9 V connector socket of the alarm
clock and plug it into a 230 V power
outlet. The display flashes as a sign
that the time has not yet been set.
The flashing disappears as soon as
the time is set.
Time setting
Press and h or min simulta-
neously to set the time.
Note:
The time can be displayed in a 12 or
24 hour modus. The setting can be
changed at the 12/24 h switch at the
back of the alarm clock.
Setting the alarm time
The alarm clock has two alarm times
that can be set separately.
Alarm time 1
Press 1 and h or min simulta-
neously to set the desired alarm
time (Duration of alarm signal
3 min).
Alarm time 2
Press 2/ Stop 24 h and h or min
simultaneously to set the desired
alarm time. (Duration of alarm signal
3 min).
Note
After the installation only alarm time
1 is active.
English 11