Bluetooth ® Pairing - THOMSON WHP6011BT Mode D'emploi

6. Bluetooth pairing
®
Note - Pairing
• Make sure that your Bluetooth
• For more information, please refer to the operating instructions of your device .
The headphones and the device should not be more than 1 metre apart . The shorter the distance, the
better .
Switch the headphones on using the ON/OFF button (3) .
1 Check the status of the status LED (5) and the signal
If the LED (5) is flashing alternately and a signal is heard:
5s
red + blue
If the LED (5) is flashing and a signal is heard:
10s
-capable device is switched on and that Bluetooth
®
„Pairing"
„Your device is
connected"
blue
Headphones searching for a Bluetooth
connection .
Headphones already paired with a Bluetooth
device .
is activated .
®
®
®
7