THOMSON WHP6011BT Mode D'emploi page 5

4. Switching on/off
Press the ON/OFF button (3) for around 3 seconds until a signal is heard and the LED (5)
ON
flashes blue .
To switch off, press the ON/OFF button (3) for around 5 seconds until a signal is heard and
OFF
the LED (5) flashes red and then goes out .
Note – Automatic switch-off of the headphones
The headphones are equipped with an automatic switch-off mechanism . If there is no connection to
your device within 3 minutes, they switch off automatically .
ON /
OFF
zZz
3 min
STANDBY
3s
5