Micro Usb - THOMSON WHP6011BT Mode D'emploi

5. Charging
Fully charge the headphones once before using them for the first time .
1
Switch off the headphones and connect them
Ensure that the headphones are switched off before charging them .
Connect the USB charging cable included to the charging socket (7) . Connect the free plug on the
micro-USB charging cable to a suitable USB charger . To do this, consult the operating instructions
for the USB charger you are using .
2
Charging process for the headphones
The LED (5) lights up solid red during the charging process .
Once the charging process is complete, the LED (5) goes out .
It can take up to 3 hours for the battery to be fully charged .
3
Battery capacity
When the headphone battery capacity is low, the LED (5) flashes red and a short signal is heard .
Note
During the charging process, the Bluetooth
3
CHARGING
red
connection is automatically disconnected .
®

micro USB

:00
CHARGED
h m
red
6