Bluetooth ® Pairing; Audio Playback - THOMSON WEAR7009 Mode D'emploi

• To switch it off, press and hold the MF button (5) until a
voice says "Power OFF" and the red LED flashes.
Note
The functions described in this section are only available for
Bluetooth -capable terminal devices.
®
5.1. Bluetooth pairing
®
Note – Pairing
• Make sure that your Bluetooth
on and Bluetooth is activated.
®
• Make sure that your Bluetooth
visible for other Bluetooth
• For more information, please refer to the operating
instructions of your terminal device.
• The earphones and the terminal device should be no further
than one metre apart. The smaller the distance, the better.
• Switch on the earphones with the MF button (5).
• Press and hold the MF button (5) until the red and blue
LEDs flash alternatingly. The earphones are searching for a
Bluetooth connection.
®
• Open the Bluetooth settings on your terminal device and
®
wait until Thomson WEAR7009 appears in the list of
Bluetooth devices found.
®
• Select Thomson WEAR7009 and wait until the earphones
are listed as connected in the Bluetooth
terminal device.
Note – Bluetooth password
®
Some terminal devices require a password in order to
connect to another Bluetooth
• If your terminal device requests a password for connection
to the earphones, enter 0000.
Note
• Once the connection has been established, a voice says,
"Connected".
• If the connection attempt takes longer than 300 seconds
to complete, it is cancelled and the LEDs go out.
• In this case, repeat the steps listed previously under 5.1
Bluetooth pairing.
®
5.2. Automatic Bluetooth
pairing)
Note
• Make sure that your Bluetooth
on and Bluetooth is activated.
®
• Make sure that your Bluetooth
visible for other Bluetooth
• For more information, please refer to the operating
instructions of your terminal device.
-capable terminal device is
®
-capable terminal device is
®
devices.
®
settings on your
®
device.
®
connection (after successful
®
-capable terminal device is
®
-capable terminal device is
®
devices.
®
• Switch on the earphones with the MF button (5). The blue
LED begins to flash and the earphones automatically connect
with the last terminal device used.
Note
• Once the connection has been established, a voice says,
"Connected".
• If the connection attempt takes longer than 300 seconds
to complete, it is cancelled and the LEDs go out. In this
case, repeat the steps listed previously under 5.2.
• It may be necessary to change the settings on your
terminal device to enable it to automatically connect to
the earphones.
Note – Connection impaired
After the headset and terminal device have been paired, a
connection is established automatically. If the Bluetooth
connection is not established automatically, check the
following:
• Check the Bluetooth settings of your terminal device to see
®
whether Thomson WEAR7009 is connected. If not, repeat
the steps listed under 5.1. Bluetooth
• Check whether obstacles are impairing the range. If so,
move the devices closer together.
• The performance can also be affected by a weak battery.
5.3. Bluetooth multipoint connection
®
These earphones can connect to two Bluetooth
devices simultaneously (multipoint).
• First connect the earphones with the first terminal device as
described in 5.1.
• Then disable Bluetooth
®
• Next, connect the earphones with the second terminal device
as described in 5.1.
• Activate Bluetooth on the first terminal device once more. The
®
earphones now connect to that terminal device automatically.

5.4. Audio playback

Note
• Note that the functions described under 5.3. and 5.4. are
only possible with an active Bluetooth
• Your terminal device must also support the individual
functions.
• For more information, please refer to the operating
instructions of your terminal device.
• Functions can still be controlled directly via the terminal
device.
• Set the volume on your terminal device to a low level.
• Switch on the earphones with the MF button (5). Upon
successful connection, a voice says, "Connected".
pairing.
®
-enabled terminal
®
on that terminal device.
connection.
®
®
3