Selecting The Input Signal; On-Screen Menu - Abus TVAC10011 Manuel Utilisateur

8.7 Finally, connect the power supply unit provided to the monitor and the 230 V AC power supply.

9. Selecting the input signal

To select the input signal, press the source button. The selected input will be displayed on the upper right
of the screen. Press the source button repeatedly until you get to the input you require.
To confirm the selected output, please then press the + or – button.
You have the choice of AV1, AV2, HDMI and VGA.

10. On-screen menu

To call up the on-screen display, please press the "Menu" button.
To adjust the settings, you have the following screen menus at your disposal.
Please note that the menu structure depends on the input signal.
Image
OSD
Function Advanced settings for displaying the menu
Geometry
Audio
Settings for the display
Settings for displaying the menu
Screen settings for VGA mode
Settings for audio playback
29
English