1- Introduction; Specifications; System Requirements - Televes 7664 Manuel D'utilisation

Adaptateur ethernet-coaxial 128 mb
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ETHERNET-COAXIAL ADAPTOR 128 Mbps
Introduction
1-
1.1- Ethernet-Coaxial Adaptor 128Mbps
Thank you for purchasing the network adaptor, the Ethernet-Coaxial Adaptor 128Mbps. Now
you will be able to connect multiple PCs to the coaxial network in your home, easily and
simply. You don't need any extra cables or Hubs, or switches. The data will use the coaxial
cable installation of the TV distribution system in your home.
The Ethernet-Coaxial Adaptor 128Mbps lets you transmit network data at the same time as
transmitting the existing TV channels or services and it can transmit up to 128Mbps (physical)
and 85Mbps Throughput.

1.2- Specifications

You can connect the computer to a network, using the existing coaxial cable, and prepa-
re your coaxial network for the exchange of data, VoIP, online/network games, IPTV, etc.
Easy installation, without the need to start your PC or install a driver.
Data transfer rate of up to 128Mbps (physical) and 85Mbps Throughput.
3 LEDs that are easy to read and indicate the adaptor status.
Possibility of connecting up to 16 PCs to your coaxial distribution network.
Neither Hubs nor Switches are required, the coaxial acts as a shared medium.
High speed shared Internet access. Share files and printers. Distribute video or VoIP
services using the coaxial network.
IEEE 802.1p service quality.
Up to 50 dB attenuation between two sockets in the return channel.

1.3- System requirements

To use this device, you need a PC with an ethernet 802.3 network interface (card).
The system is completely Plug&Play and it is not necessary to install any additional soft-
ware or driver.
6
Ref. 7664

Publicité

Chapitres

Table des Matières
loading

Table des Matières