ETHERNET-COAXIAL ADAPTOR 128 Mbps
- The plugs should be near the equipment and should be easily accessible.
- Do not connect to the power supply until the installation is complete.
- To disconnect the equipment from the mains, unplug the adaptor.
- Do not use oils, solvents, petroleum, paint thinner or insecticides on this product.
- No part of this product can be repaired by the user. Do not open the product as you run the
risk of electric shock.
- Do not use this product near water, for example; bathrooms, sinks, damp areas, pools, etc.
- Power the product using the supply indicated on the label.
- Unplug the adapter from the mains in the following cases:
a) When the plug has been damaged.
b) When the product has been in contact with water.
c) If the product does not function normally.
d) If the product is broken.
This symbol indicates total compliance with the CE mark.
This symbol indicates that the equipment is for indoor use.
This symbol indicates that the equipment complies with the safety requirements for
class II equipment.
Important safety instructions
3
Ref. 7664