Important - Televes 7664 Manuel D'utilisation

ETHERNET-COAXIAL ADAPTOR 128 Mbps
Example 2: Shared internet access
To have shared internet access, connect one of the adaptors to a broadband router.
The internet router must provide all the services that the users that are connected to the adap-
tors (DNS, DHCP, NAT, etc) need. To carry out a correct installation, consult the router manual
supplied by your Internet provider.
To connect the adaptor with the broadband router use the ethernet crossed cable.

Important

The adapter is connected to the PC using the Ethernet cable supplied
with the adapter.
The adapter is connected to the ADSL router using a crossed cable (not
supplied with the adapter)
Important
The attenuation between all of the points on which a 129 Mbps Ethernet-
Coaxial Adapter is situated must not exceed 50 dB in the return channel
(4-21 MHz).
(1) Filters are recommended (refs: 7653, 7654 ó 7668) after the headend
Coaxial cable
Diplexer filter 1
TV
socket
Slave
adapter
TV
socket
Attenuation <50 dB
Ethernet cable
FPB Ref 7654 FPA
Distributor
TV
socket
Distributor
Router
ADSL
TV
socket
14
Ref. 7664
Master
adapter
Internet
Slave
adapter
Crossed
cable