Hilti DD 160 Mode D'emploi Original page 15

Dimensions (L×W×H)
Rated speed under no load
Protection class
Rated power (at 230 V)
Max. permissible water supply pressure
4.2 Rated voltage
The product is available with various voltage ratings. Please refer to your product's type identification
plate for details of its voltage and input power ratings.
Rated voltage 100 V
Rated current
15 A
input
AC frequency 50/60 Hz 50/60 Hz 50/60 Hz
4.3 Using extension cords
Use only extension cords of a type approved for the application and with conductors of adequate gauge.
Recommended minimum conductor cross-sections and maximum power cord lengths:
Conductor cross-
section →
↓ Mains (AC) voltage
100 V
110 V
127 V
220 V
230 V
240 V
4.4 Use of the machine with various items of equipment
Equipment
Without water collection system
without dust removal system
With water collection system
without dust removal system
With water collection system
With dust removal system
*434952*
Printed: 09.08.2019 | Doc-Nr: PUB / 5069575 / 000 / 07
Combination base plate
110 V 110 V
GB TW
16 A 15 A
1.5 mm² 2.5 mm²
Not
recommended recommended
Not
recommended
Not
recommended
35 m
40 m
40 m
Core bit diameter
1.0 in ... 8.0 in
(25 mm ... 202 mm)
1.0 in ... 6.4 in
(25 mm ... 162 mm)
1.0 in ... 6.4 in
(25 mm ... 162 mm)
434952
24.0 in x 37.5 in x 9.8 in
(610 mm x 952 mm x 250 mm)
1st gear 460 /min
2nd gear 760 /min
3rd gear 1,690 /min
Protection class I (earthed)
2,200 W
70 psi
(5 bar)
120 V 127 V 220 V
19.5 A 18.5 A 10 A
60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
3.5 mm²
Not 25 m
15 m Not
recommended
20 m Not
recommended
65 m Not
recommended
70 m Not
recommended
70 m Not
recommended
Drilling direction
Not upwards
Not upwards
All directions
230 V 240 V
10.3 A 9.9 A
4.0 mm²
Not
recommended
30 m
35 m
105 m
Not
recommended
110 m
English 9