Safety Instructions; General Safety - Dometic WAECO CoolMatic HDC155FF Instructions De Montage

HDC155FF
A
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.
I
NOTE
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
Fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

Safety instructions

The manufacturer accepts no liability for damage in the following cases:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
2.1

General safety

WARNING!
!
 Have a qualified technician perform the installation in wet
rooms.
 Do not operate the device if it is visibly damaged.
 If this device's power cable is damaged, it must be replaced by
the manufacturer, customer service or a similarly qualified
person in order to prevent safety hazards.
 This device may only be repaired by qualified personnel.
Inadequate repairs may cause serious hazards.
EN
Safety instructions
35