Blaupunkt CLARA 390 Mode D'emploi page 27

General settings Menu
After the system is switched on, hold both
UP and DOWN buttons for 2 seconds to
access general settings menu. To exit
general settings menu hold MODE button
for 2 seconds.
TRIP DISTANCE reset:
TC is displayed. Toggle between Y or N by
pressing UP and DOWN buttons. Default
value is N. Press MODE button to store
settings and switch to contrast settings.
BACKLIGHT CONTRAST setting:
bL is displayed. Choose between Levels 1, 2
and 3 where 3 is maximum contrast. The
default value is 1. Press UP or DOWN to
toggle between various contrast levels.
Press MODE button to store settings and
switch to km/mile conversion settings.
KM/MILE display conversion setting:
U is displayed. 1 stands for miles and 2
stands for kilometer. The default value is 2.
Press UP/DOWN buttons to select desired
mode. To store changes press MODE button
to store settings. The system will take you
back to trip distance reset.
SAFETY NOTE:
Only operate settings in case of parking the e-
bike.