Electrical Supply; Steps For Installation; Technical Data; Installation Notes - Haier HCW3460AES Instructions D'installation

Masquer les pouces Voir aussi pour HCW3460AES:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STEPS FOR INSTALLATION

The following pages provide the necessary information for
proper installation of the oven and are arranged as follows:

Technical Data

Installation Cutout Dimensions, Required Clearances and
Mounting instructions for:
- Under counter Installation, Single Oven
- Wall Installation, Single Oven
TECHNICAL DATA
For cutout dimensions see following section titled:
Preparing location
SINGLE OVEN
HCW3460AES

INSTALLATION NOTES

1.
Do not slide oven across floor. Damage to floor covering
or floor could result.
2.
The oven support surface must be a minimum 3/4" (2cm)
thick plywood platform.
For single ovens, it must support 202 pounds.
The platform must be solid, level and flush with the bottom of
the cabinet cut out.
3.
Use extreme caution when moving or installing the oven.
It is very heavy.
DO NOT LIFT THE OVEN BY THE DOOR HANDLE,
remove the door for easier handling and installing.
See REMOVING THE DOOR in the maintenance section
of the Operating Instructions.
4.
Be very careful when moving or installing the oven to
avoid damage to the oven frame or damage to the cabinets.
5.
Be sure to level the oven. An oven that is not level may
provide poor or inconsistent baking results.
6.
Be careful when placing oven. DO NOT pinch the conduit
between the oven back.
Ltr.
DIMENSION
A
Cutout Width
B
Cutout Depth
C
Cutout Height
D
Oven Position (distance from floor)
E
Minimum Spacing
4
Electrical Supply and Wiring Requirements, Programming
required if connecting to 120V/208V Circuit. Electrical
Connections for 3-wire or 4-wire Branch Circuit.
Final Checklist
Electrical Ratings and Maximum Connected Load
@ 120V/240V 60Hz
Amperes
kW
16.1
3.79
Before installing or removing, turn power OFF at the service
panel. Lock service panel to prevent power from being turned
ON accidentally.
Securely fasten oven to cabinet using the screws provided.
Failure to do so could result in oven moving or tipping
during use and causing damage to the oven or cabinets or
personal injury.
Know how to disconnect the power to the oven at the circuit
breaker or fuse box in case of an emergency.
Unit is heavy and requires at least two people or proper
equipment to move.
Do not remodel the oven.
Installation Manual
ENGLISH
@ 120V/208V 60Hz
Amperes
17.8
WARNING
CAUTION
CAUTION
SINGLE
30"
28 7/16"
(72.2 cm)
24"
(61 cm)
27 3/8"
(69.5 cm)
34"
(86.5 cm)
1/2"
(1.3 cm) min
ENGLISH
kW
3.64

Publicité

Table des Matières
loading

Table des Matières