Messages D'alarme - Trumpf TruConvert AC 3025, TruConvert System Control Manuel Opérateur

Messages d'alarme

Number Message
40302 BMS communication timeout has occured.
40303 RS-485 communication alarm.
40412 Software versions of system control and module(s) do not match.
40413 Software versions of system control and module(s) do not match.
40414 Software versions of system control and module(s) do not match.
40415 Software versions of system control and module(s) do not match.
40416 Software versions of system control and module(s) do not match.
40304 No slave module was found, please check RS-485 connection(s).
40305 Number of or combination of connected slave types not supported.
50000 Overtemperature IGBT bridge 1.
50001 Overtemperature IGBT bridge 2.
50002 Overtemperature IGBT bridge 3.
50003 Overtemperature balancer.
50004 Ambient temperature over allowed range.
50005 Overcurrent L1.
50006 Overcurrent L2.
50007 Overcurrent L3.
50008 Overcurrent balancer.
50009 Overvoltage grid L1.
50010 Overvoltage grid L2.
50011 Overvoltage grid L3.
50012 Overvoltage filter capacitor L1.
50013 Overvoltage filter capacitor L2.
50014 Overvoltage filter capacitor L3.
50015 Overvoltage DC link positive part.
50016 Overvoltage DC link negative part.
50080 Overvoltage grid N to PE.
50081 Overvoltage internal DC link.
50082 Overvoltage internal N to PE.
50083 Overvoltage external DC link positive part.
50084 Overvoltage external DC link negative part.
50085 Overvoltage external DC link.
50086 Overvoltage external DC link star point to PE.
50087 Wrong polarity on DC link detected.
50088 Overvoltage external auxiliary supply 24 V.
50089 Undervoltage external auxiliary supply 24 V.
50018 Overcurrent L1 hardware.
50019 Overcurrent L2 hardware.
50020 Overcurrent L3 hardware.
50021 Overcurrent balancer hardware.
50095 AC-DC module hardware protection alarm.
50096 DC link precharge unit alarm.
88
Recherche des erreurs 2021-03-03 A67-0141-00.BKfr-0
01-07